Notifications
Clear all

[Sticky] How to use and install the boot screens for the Carpuride W702 and W502 Units.

3 Posts
3 Users
0 Reactions
561 Views
Nadeem
(@nadeem)
Posts: 462
Noble Member Admin
Topic starter
 

Hi all, first off in this section, you will see a jpeg image and a dot bin file. The jpeg is only for reference and for you to see what the new boot screen will look like once you install the bin file. Download the bin file to your PC / MAC.

 

Things to note:

You are best using a Micro SD card that is 32GB or less and ensure that it is formatted to FAT32.

 

WE RECOMMEND THAT YOU USE A 32GB card as they seem to have less issues loading the bin files.

 

If you have a 64GB car you can use that on the newer units, but it must be formatted to EXFAT. Ensure that the card has no other files on it and no folders / directories

 

The video below shows the steps to take to install:

 


 
Posted : 03/04/2025 7:51 am
(@richardslater05)
Posts: 1
New Member
 

Hi not sure what I am doing wrong but overtime I try this also data screen it doesn't work either nothing happening or it says video format not supported, using 32gb san disk ultra ,have got cheap one coming from Amazon 


 
Posted : 07/07/2025 3:32 pm
Nadeem
(@nadeem)
Posts: 462
Noble Member Admin
Topic starter
 

Most likely it is the card - The San Disk Ultra cards cause issues.


 
Posted : 07/07/2025 5:26 pm
Share: